Scientific laboratory Instrument Manufacturers & Supplier in Delhi

Description
Technical Specification

Construction & Salient Features:

Type: AIr Jacketed / Stackable design
Interior construction: High grade Single Sheet stainless steel of grade SS-304/SS316 with rounded corners (No weld/Joints) ensures greater stability and life, simplifies routine cleaning protocols.
Outer body: Made of High-grade MS/GI sheet and coated with bacteria resistant film with rounded corners.
Door: Made of MS/GI steel sheet. High quality neoprene rubber gaskets used for air tight fittings.
Door hinges, associated cable and other accessories are robust and stringently tested.
Inner Glass: Heated dual pane inner glass security door facilitates quicker recovery to desired set point and monitoring of samples without disturbing conditions of the chamber.
Locking systems: locking systems provided for security and safety purpose.
Illumination: Our CO2 Incubators are door operated illumination system comprising of fluorescent light.
Temperature control Range: Ambient + 3 Deg.C to 55Deg.C with suitable adjustable limits.
Temperature control: Dual temperature Sensor inside CO2 Incubators controlled by programmable microprocessor based PID controller cum indicator.

Sensor: Infra-Red (NDIR type ) dual beam Co2 sensor, providing reliable, long service life CO2 measurement and control, is located directly within the culture chamber and withstand at 140 °C or higher during high temperature disinfection.
HEPA filter for high level clean air to minimize contamination.

Purpose	GENERAL USE IN ANIMAL CELL CULTURE
Temperature Control
Interior Volume		150-170 liters
Controller		Microprocessor based PID digital controller
Display		LCD Backlight touch pad display for complete data Like Temperature, Alarms, and visibility to monitor all incubator interaction.
Temperature range	°C	Ambient +5°C to 50°C with an accuracy of ± 0.1 °C
Temperature Uniformity	°C	± 0.25°C
Temperature Control	°C	± 0.1 at 37°C
Humidity		95 ±5% RH
Relative Humidity Control		It has gentle air flow through the duct.
CO2 concentration range		0-20 % with an accuracy of ± 0.1%
CO2 Controllability		±0.1% 37°C
CO2 Uniformity		±0.1% at set 5.0% CO2 concentration at 37 ºC set temperature
CO2 recovery rate		≤ 10 min after door opening and closing event.
Operational Gas Pressure	Psi	8 to 20 psi
Direct Heat & Air jacket system		It is with three sources of heat- sides, door, and independent bottom heaters, all of which is located outside the chamber
Sensor		Infra-Red and NDRI type Co2 sensor withstands more than 140°C Temperature decontamination Cycle run and with dual wavelength measurement for continuous auto-zero calibration
Dry Heat Sterilization		180°C heat decontamination with cycle duration under 24 hours Sterilization without removing any part. It also have provision for adding a UV lamp in the future for dual sterilization for growing primary cells and organoids.
Heating Element		Six-sided direct heating with fan less, gentle convection circulation design to provide stable temperature control.
HEPA Filter		HEPA Filtration system 99.99% @ 0.3micron before entering chamber volume with Fan
Audio/visual Alarm		Audio & visible alarm for both High/Low Temperature and gas levels, Door, independent overheat protection, Power failure. Door Ajar etc.
Standard Shelves ( as per Customer requirement)		3/4 nos. Standard Perforated SS 304 stainless steel shelves for easy cleaning. Additional Proision of shelves can be provided as per requirement.
Humidity Tray		Tray with an independent heater at the base of the incubator for maintaining humidity. It is for easy cleaning and refilling of distilled water.
Data Collection (Optional)		R-232/USB Port to capture Log Data transfer from the unit to USB Memory stick and a PC
Power consumption		230V, Single Phase, 50 Hz
Voltage Stabilizer (Optional)		Suitable In-built Stabilizer
Certificate Compliance		CE, ISO 9001:2015,GMP, ISO13485, IEC61060
Warranty		One Year standard Warranty after Installation.
Optional Accessories CO2 cylinders, High-quality long-lasting CO2 regulators, Sufficient transparent tubing and filters

Arc-1143-co